Fiat Dino Forum (FDF)

Hi

Can anyone give me some advice on how best to remove the Front Upper Wishbone Bush? I can't get it into a press because of the shape of it.

Any help would be very much appreciated.

Thanks

It was crude but.... I used a long metal cutting blade on a jig saw, cutting from the inside, and removed a section, the remainder came out easily. Just be careful not to cut into the wishbone...

Rick Wohleber
Portland Or

Thanks Rick

Thats the route I am going to take, cut a slot in it and then get some heat on it to try and break the bond.

Cheers