Page 1 of 1
2000 head into 2400 engine.
Posted: Tue Aug 04, 2015 7:44 pm
by Barnfind
Hello.
Does anybody have tried to fit a 2000 head into a 2400 engine?
Valves are smaller, are the seats also smoller? Air pipes?
Is combustion chamber smaller?
Thanks.
Re: 2000 head into 2400 engine.
Posted: Wed Aug 05, 2015 10:36 am
by Dinoswede
I doubt it will work. The difference in cylinder / combustion chamber diameter is 6,5 mm, the intake valve diameter difference is 2,5 mm, the exhaust valve
diameter difference is 2 mm.
Furthermore, because of the smaller combustion chamber diameter in the 2 Litre heads, I suspect the valves will not be correct positioned to the 2,4 Litre
piston top.
Dinoswede
Re: 2000 head into 2400 engine.
Posted: Wed Aug 05, 2015 10:43 am
by Barnfind
Well, if that is the case, I have a left cylinder head for sale..
Re: 2000 head into 2400 engine.
Posted: Wed Aug 05, 2015 3:50 pm
by Georg
Hi, I may have a left head 2400 for sale. Very good original condition, has never been skimmed.
Georg
Re: 2000 head into 2400 engine.
Posted: Thu Aug 13, 2015 5:39 pm
by Andrea
Hi, sorry for the ignorance, but the left one from the steering wheel or watching the car?
Thank you.
I might be interested.
Andrea
Re: 2000 head into 2400 engine.
Posted: Sat Aug 15, 2015 12:38 pm
by Georg
Left side cylinders 4-6.
Re: 2000 head into 2400 engine.
Posted: Mon Aug 17, 2015 7:01 am
by Barnfind
Georg wrote:Left side cylinders 4-6.
Correct.
Head for banks 4-6
Re: 2000 head into 2400 engine.
Posted: Fri Aug 21, 2015 9:45 am
by Andrea
I am interested then. Can se discuss?
Re: 2000 head into 2400 engine.
Posted: Mon Aug 24, 2015 8:10 pm
by Georg
@Andrea: Kindly send your phone number with a PM, I would call you. Georg
Re: 2000 head into 2400 engine.
Posted: Thu Sep 10, 2015 9:46 pm
by Andrea
Hi, I posted my details but I am not sure you got them.
00352621338916
Call me or sms me.
Thank you
Kind regards
Andrea