Fiat Dino Forum (FDF)

Hello..

I'm quite interested to know what oil are you using in the 2400 diff and Gbox.

Regards..

Fiat Selenia FL Teutela W90/M-DA 80w-90 in diff.

Millers Classic Gear Oil 80W/90 GL4 in gearbox.

There are many perfectly suitable choices for the gearbox, but as I understand it, the Fiat stuff is the ONLY one recommended for use in the diff.


Andy

What type of diff has the Dino 2400:

Limited slip (Discs type). Fergusson or Torsen?

Thanks..

Use in the Diff only only only the recommended W 90 M/DA! Other oils, also if recommended for lim slip diffs will cause noisy operations.

where can you get such oil in the us? Superformance is not shipping oil to the us..

I bought it from a local Iveco (Fiat Trucks) Dealer. Is there anything like this in the US?
As it is not a special classic car oil it should be able to get it.

Ok. Fair enough.

I'll try to find it in local truck shops.

Thanks.

Barnfind wrote: I'll try to find it in local truck shops.

It might be hard to find in any local truck shop since it seems to be Fiat-/Iveco-specific. Anyway, I've attached the data sheet that you can specify it exactly when looking for it.

I'm in the US and I used Amsoil gear oil
http://www.amsoil.com/shop/by-product/g ... e=AGLQT-EA

with limited slip additive
http://www.amsoil.com/shop/by-product/g ... e=ADATB-EA

That cured all the noises from the rear end. It was all part of my big "drivetrain vibration" problem, but that's all in another thread.

-Richard

Oh and in the gearbox I used Amsoil GL4 oil
http://www.amsoil.com/shop/by-product/t ... e=MTGQT-EA

GL-4 and not GL-5 because there are apparently additives in GL-5 (Sulphur, I think) that can damage brass synchronizers like our ZF gearbox has.

Yes I really like Amsoil products because they work really well and are actually what they say they are (real synthetic, not "synthesized" from normal oil-stock or mixed) and no, I don't work for them.

-Richard