Page 1 of 1

Exhaust systems - Coupes

Posted: Thu Sep 11, 2014 8:25 pm
by alexjordan
Hi, Does anyone know if the 2l and 2.4l exhaust systems are interchangeable for fit? Also can a 2l centre section be fitted to a 2.4 l rear section?

Many thanks


Alex
2L Coupe

Re: Exhaust systems - Coupes

Posted: Sat Sep 13, 2014 5:24 pm
by Georg
Both systems are completely different and not compatible.
Georg

Re: Exhaust systems - Coupes

Posted: Mon Sep 15, 2014 5:58 pm
by Skogens Baron
Hello

I dont mean to hijack the thread but it seems like the question was answered good enough.

I was wondering for the Fiat 2400 Coupe, what kind of exhaust systems do you run? Superformance? Dinoparts? Imasaf? I need a complete new system on my 2400 and its tempting to buy stainless. What do you guys recommend? Any experience with the stainless headers?

Best regards

Daniel

Re: Exhaust systems - Coupes

Posted: Wed Sep 17, 2014 10:50 pm
by Georg
Hi Daniel
I have fitted my Coupé 2.4 with an Imasaf system in 2001 and there are still no indications of corrosion or wear. This is 13 years. Quality is good. The current pruchase price for a complete system (4 items) amounts to approximately EUR 600 in Germany at dealers such as Holtmann & Niedergerke Tel 0049 5231 61790.
The exhaust system offered by Superformance differs from the FIAT original as Superformance' front section has only one silencer (at least so to be seen on Superformance' webshop) whereas the FIAT original and Imasaf reproduction have two. With regard to the price the Superformance version is slightly more expensive than Imasaf.
The Dinoparts' system also has only one silencer at the front section and is THREE times more expensive :o .
Your choice
Georg

Re: Exhaust systems - Coupes

Posted: Thu Sep 25, 2014 12:38 pm
by Skogens Baron
Hi Georg, thank you for your reply.

Seems like quality for the IMASAF system is good then, and the price seems fair as well.. I have read from several owners that stainless systems have a completely different sound, but on other cars it seems like stainless is preferred? My car has fitted an unoriginal system and the sound is like a Granada V6 from the outside ;) Paying that much more for the Dinoparts system is not interesting at all.. Is the "three into one" part and headers allso available from Imasaf?

Best regards

Daniel

Re: Exhaust systems - Coupes

Posted: Sun Oct 05, 2014 12:20 pm
by Georg
Hi Daniel, as far as I know Imasaf does not supply 3-1 and headers. But I have a set of original 3-1 and a set of original headers in good conditions which I would sell. Please let me know if you are interested. Perhaps you send a PM with your telephone number and email adress to send you some fotos of both items. Wood make it easier to communicate.
I know from the 246 Dino that the stainless steel exhaust system indeed alters the sound.
Regards
Georg