Hi, Can anyone advise me please of where the tube for the rear 3/4 Window finishes up.
It looks like it just dumps the water into the inside of the sills as there are no outlets for it.
Is this right? I was thinking of drilling a hole in the underside and bringing the pipes through the floor via a grommet.
Rear 3/4 Window drainage
Moderators: doublegarage, Philt68
-
- Posts: 39
- Joined: Mon Mar 16, 2020 10:52 pm
- Dino: Fiat Dino 2.0 Coupe
- Location: Ireland
Re: Rear 3/4 Window drainage
Yes you are right. Not ideal, however, the sills should have an opening where the water can drain, but often this whole is closed with dirt etc.or was removed when sills are replaced not completely as original.
-
- Posts: 39
- Joined: Mon Mar 16, 2020 10:52 pm
- Dino: Fiat Dino 2.0 Coupe
- Location: Ireland
Re: Rear 3/4 Window drainage
Thank you Thomas. Sills are solid and replaced I'd be confident.
So I hear the originals had drainage? I'll probably reduce down the size of the tube from 1/2" and drill a hole as far inboard as I can.
Thanking you.
So I hear the originals had drainage? I'll probably reduce down the size of the tube from 1/2" and drill a hole as far inboard as I can.
Thanking you.