Does anyone have experience with the different exhaust systems: Stainless versus standard.
The stainless seems to have three silencers, versus four on the standard. How much louder is it? Or is the damper different and therefore the sound comparable?
Thanks.
Stainless versus standard exhaust
Moderator: alh
-
The Dutch Dino
- Posts: 87
- Joined: Wed Nov 20, 2013 9:34 pm
- Dino: Fiat Dino 2.4 Coupe
- Location: The Netherlands
Stainless versus standard exhaust
Leo
Dino Coupé 2400x2
The Netherlands
Dino Coupé 2400x2
The Netherlands
- Tobi
- Site Admin
- Posts: 567
- Joined: Thu Nov 14, 2013 7:56 am
- Dino: Fiat Dino 2.4 Coupe
- Location: Upper Palatinate - Bavaria
Re: Stainless versus standard exhaust
The stainless exhausts of Superformance and DinoParts have three sliencers instead of four (standard). Usually, SS exhausts sound different due to the material, often a bit tinny.
Maybe this thread helps a bit: http://www.dino-register-deutschland.de ... tahl#p2610
Sound is not a big issue here, but common sense is that the SS exhaust is too expensive compared to the standard ones of Imasaf. They are reasonably priced and have good quality. Mine is 9 years old and like new.
Maybe this thread helps a bit: http://www.dino-register-deutschland.de ... tahl#p2610
Sound is not a big issue here, but common sense is that the SS exhaust is too expensive compared to the standard ones of Imasaf. They are reasonably priced and have good quality. Mine is 9 years old and like new.
-
The Dutch Dino
- Posts: 87
- Joined: Wed Nov 20, 2013 9:34 pm
- Dino: Fiat Dino 2.4 Coupe
- Location: The Netherlands