Page 1 of 1

fiamm compressor and air horns

Posted: Wed Mar 11, 2020 11:03 am
by ronenya
I have here an original set of Fiamm road master compressor and air horns. I attached to a battery, the compressor is working, but there came no sound...
send me a message for a price request

Re: fiamm compressor and air horns

Posted: Wed May 06, 2020 7:08 pm
by ronenya
The Price is 300ָ€

Re: fiamm compressor and air horns

Posted: Fri May 08, 2020 7:40 pm
by ThomasK
I am not sure if I get it right: it is not working and you want 300Euro?

Re: fiamm compressor and air horns

Posted: Sat May 09, 2020 6:31 pm
by croker
Hi. Please private message me. Interested.

Re: fiamm compressor and air horns

Posted: Sun Jun 28, 2020 3:30 pm
by ronenya
Hi, Sorry for not reacting, I was long out of the board.

@ThomasK, As a matter of fact the compressor is working, only it doesn't horn always, like it used to...

Thanks for @Tobi(admin) for recovering my old user name!

For more details call me to +4915120206012

Re: fiamm compressor and air horns

Posted: Tue Jun 30, 2020 5:13 am
by ebrown5686
Hi Ronenya,
I was having trouble with mine, compressor working and hoses intact. I pulled off the trumpets, cleaned the inside of the trumpets and got some crud out of the bases. It still wouldn't work...but I discovered in my case they didn't work until I started rotating the trumpets up and down and found that when I got to a certain length, they would take off again! Something to do with the harmonics, just like a musical instrument I guess. Mine have been working fine now for a couple of years.
I can't promise it will work, but I did have some fun playing with them and you probably have nothing to lose. Good luck and hope this helps. It's great when they finally start bellowing again!
Ed Brown

Re: fiamm compressor and air horns

Posted: Tue Jun 30, 2020 8:56 am
by ronenya
Hi Ed,

Thanks for the tips, I will just give it a try...

- ronen

Re: fiamm compressor and air horns

Posted: Wed Jul 01, 2020 7:24 am
by jtperry8sf9
Ronen,
Be extremely careful to not over tighten the trumpets. You will damage the internal, very thin, brass shims which vibrate with the air pressure. Guess how I know! I managed to remake mine out of some very thin shim stock and they do work again.

Johnny Pergolizzi
San Diego, Ca.

Re: fiamm compressor and air horns

Posted: Fri Jul 03, 2020 11:16 pm
by ronenya
Hi Johnny, thank you the issue was solved and the airhorns already sold!