How do I remove trim Dino coupe 2000?

Technical Topics and Discussions

Moderator: alh

Post Reply
bhiggins2
Posts: 140
Joined: Wed Jun 24, 2020 5:54 pm
Dino: Fiat Dino 2.0 Coupe

How do I remove trim Dino coupe 2000?

Post by bhiggins2 »

I need to make a repair to the lower section of the front wing panel on my coupe, above the front right jack point. I would like to remove the stainless steel rocker trim. Can anyone tell me how to go about removing this piece of trim? Thanks, Ben.
Attachments
20210124_160822.jpg
4cambob
Posts: 111
Joined: Sat Sep 24, 2016 9:19 am
Dino: Fiat Dino 2.0 Coupe

Re: How do I remove trim Dino coupe 2000?

Post by 4cambob »

I would use a thin wide metal spatula and slide it between the bodywork and trim ,note there are two clips within that you must avoid,then gently ease the trim off. Do not use screwdiver or similar as this will mark the paint and trim.
big--578e30dd.jpg
big--578e30dd.jpg (13.1 KiB) Viewed 2592 times
bhiggins2
Posts: 140
Joined: Wed Jun 24, 2020 5:54 pm
Dino: Fiat Dino 2.0 Coupe

Re: How do I remove trim Dino coupe 2000?

Post by bhiggins2 »

Can anyone point me to what the trim clips look like?
Thanks, Ben.
4cambob
Posts: 111
Joined: Sat Sep 24, 2016 9:19 am
Dino: Fiat Dino 2.0 Coupe

Re: How do I remove trim Dino coupe 2000?

Post by 4cambob »

bhiggins2
Posts: 140
Joined: Wed Jun 24, 2020 5:54 pm
Dino: Fiat Dino 2.0 Coupe

Re: How do I remove trim Dino coupe 2000?

Post by bhiggins2 »

Thanks. That is helpful to know I am dealing with a round plastic clip below the trim. Ben.
Post Reply