Dino 2400 Spider Vinyl Trim
Moderator: alh
Dino 2400 Spider Vinyl Trim
I recently sourced a pair of headrests for my 2400 Spider.Unfortunately theses have been covered in trim different to the typical vinyl trim on the 2400 Spiders.Does anyone know where to source the original style vinyl for the 2400 Spider?I contacted Superformance who supply a seat trim kit but this does not include headrest covers and I was advised they cannot help me with my enquiry.
Any guidance on this would be appreciated.
Thanks
Any guidance on this would be appreciated.
Thanks
-
- Posts: 179
- Joined: Mon Jul 24, 2017 7:22 pm
- Dino: Fiat Dino 2.4 Spider
- Location: The Netherlands
Re: Dino 2400 Spider Vinyl Trim
I would try Elvezio Esposito; https://www.elvezio.com/
Re: Dino 2400 Spider Vinyl Trim
where are you located/
Re: Dino 2400 Spider Vinyl Trim
Thanks for your recommendation.I will contact this source.I am located in Melbourne Australia.
Re: Dino 2400 Spider Vinyl Trim
Hi Dino 2400,
I recently purchased from superformance some vinyl off the roll that was correct for my 2400 spider. Maybe look at their website for Ferrari 246 vinyl to see if they still list it.
Alternatively call SF, speak to Colin Sowter ( proprietor) and see what he can offer,
Regards,
Brian boxall BS1319/1470
I recently purchased from superformance some vinyl off the roll that was correct for my 2400 spider. Maybe look at their website for Ferrari 246 vinyl to see if they still list it.
Alternatively call SF, speak to Colin Sowter ( proprietor) and see what he can offer,
Regards,
Brian boxall BS1319/1470
Re: Dino 2400 Spider Vinyl Trim
Part number 24601031 under Ferrari v6, body fittings in superformance website catalogue. Looks right for the 2400 spider as well as the 246GT/S
Brian
Brian
Re: Dino 2400 Spider Vinyl Trim
Thanks Brian.I will get in touch with SF again.This is very helpful.
Regards,
Steven
Regards,
Steven
Re: Dino 2400 Spider Vinyl Trim
https://smsautofabrics.com
they are in Oregon and carry the correct vinyl in black and brown
they also can make the correct soft top vinyl straps(with the heat indentation) and if you send them your door panels they can recover them and do the proper heat stitchings as per original...
Hervé
they are in Oregon and carry the correct vinyl in black and brown
they also can make the correct soft top vinyl straps(with the heat indentation) and if you send them your door panels they can recover them and do the proper heat stitchings as per original...
Hervé
Re: Dino 2400 Spider Vinyl Trim
Thanks Herve.Also very helpful advice particularly your tip on recovering the door panels.I placed an order with SF last night.Confusingly they only list the fabric under Ferrari Dino and not Fiat Dino.I wouldn’t have known this if not for Brian’s advice.
Regards,
Steven
Regards,
Steven