Advice re Front wing badge 2400 coupe

Technical Topics and Discussions

Moderator: alh

Post Reply
Nugget15
Posts: 6
Joined: Sat Jul 16, 2016 7:12 pm
Dino: Fiat Dino 2.4 Coupe

Advice re Front wing badge 2400 coupe

Post by Nugget15 »

Appreciate any advice as to the correct material for the Bertone B badges on the front wings of a 71 2400 Coupe. Should they be chromed metal, or chromed plastic? Also same question for the B on the radio blank in the centre console.

Many thanks

Antony
Dario
Posts: 117
Joined: Fri Nov 29, 2013 12:18 pm
Dino: Fiat Dino 2.4 Coupe

Re: Advice re Front wing badge 2400 coupe

Post by Dario »

Hi, the ones on the wings are metal. I have to check the one on the radio blank-off plate, but I think that it is plastic.

I ordered one of the wing badges from Superformance and found it to be a good match to the original one on the car.

Best,
Dario
Nugget15
Posts: 6
Joined: Sat Jul 16, 2016 7:12 pm
Dino: Fiat Dino 2.4 Coupe

Re: Advice re Front wing badge 2400 coupe

Post by Nugget15 »

Thanks Dario, good advice. I'd bought some wing badges which whilst they appear to be the correct size, they are plastic which just didn't "feel" correct.
Luis A
Posts: 86
Joined: Tue Oct 31, 2017 12:35 am
Dino: Fiat Dino 2.4 Coupe

Re: Advice re Front wing badge 2400 coupe

Post by Luis A »

I purchased a couple of those maybe a year or two ago and they were also plastic. Did not find any in metal. Where have you found them in metal? And are we sure originals were metal??
Post Reply