Search found 117 matches
- Tue Apr 12, 2022 12:13 pm
- Forum: Technical Discussions
- Topic: Clock repair 2000 coupe
- Replies: 8
- Views: 1613
Re: Clock repair 2000 coupe
Hi Ben, if you are there already, can you post a picture? I see that the face is a little different from mine which had the stalk at the 6 O'clock position.
- Mon Apr 11, 2022 6:48 am
- Forum: Technical Discussions
- Topic: Clock repair 2000 coupe
- Replies: 8
- Views: 1613
Re: Clock repair 2000 coupe
Hi, I'm currently travelling so no access to the pictures at home-I think I have a few of the clock's interior. If you are courageous enough, you need to start by opening it: pull off the knob for setting the time then, turn over the clock and with a very small screwdriver and pilers, bend back the ...
- Sat Apr 09, 2022 9:10 pm
- Forum: Technical Discussions
- Topic: Clock repair 2000 coupe
- Replies: 8
- Views: 1613
Re: Clock repair 2000 coupe
Hi, a search of Adrian Le Hanne's posts on clock repair will yield priceless info. Generally, it seems that the capacitors fail (leak) and this would potentially explain the symptoms that you describe. The two transistor (BC148C) can also fail, and are sometimes available on eBay, but then nothing w...
- Tue Mar 08, 2022 11:16 pm
- Forum: Technical Discussions
- Topic: Gearbox removal 2.4 Coupe
- Replies: 5
- Views: 1983
Re: Gearbox removal 2.4 Coupe
I did this a few times: once to replace the spigot bearing, then again for rebuilding it, and then for doing what the shop did not do: carefully check the longitudinal play on the main and lay shafts. It can be done with 4 axle stands in half a day (2-3 hrs with practice): -drain oil and disconnect ...
- Wed Feb 16, 2022 2:02 pm
- Forum: Technical Discussions
- Topic: Air filter - aftermarket options
- Replies: 16
- Views: 4072
Re: Air filter - aftermarket options
Hi, I had the arrangement with the three separate KN filters, like Tobi's. I agree that it is not optimal for performance, but since I am not racing it, it just makes the V6 look fantastic - assuming that you cleaned your carbs and detailed the rest :D I took them off to go back to stock for a conco...
- Sat Dec 04, 2021 10:59 pm
- Forum: Technical Discussions
- Topic: Remowing cylinder heads with engine in car?
- Replies: 6
- Views: 2121
Re: Remowing cylinder heads with engine in car?
Too bad that the Forum was down so long, I did this first thing when I got my car and had plenty of photos and info to share! It looks like you mastered it with flying colours, congratulations! If you haven't already bolted them back, I found that raising the back of the engine just a little with a ...
- Wed Sep 29, 2021 11:15 am
- Forum: Technical Discussions
- Topic: My Dino has strong bad exhaust smell
- Replies: 6
- Views: 2472
Re: My Dino has strong bad exhaust smell
Hi, There are a lot of locations where the exhaust can leak and get back into the cabin. Is it only with the windows open, or also with the windows closed? Things to check: Pull back the carpets in the front footwells of the car and check the bulkhead for holes to the engine compartment. On the pass...
- Thu Jun 10, 2021 10:16 pm
- Forum: Technical Discussions
- Topic: Replacing valve stem seals with the engine in car
- Replies: 8
- Views: 3849
Re: Replacing valve stem seals with the engine in car
Just to add my 2 cents, I found that raising the back of the engine to tilt it forward a little makes a world of difference when removing that last blanking plate on the back of the right camshaft cover. I would certainly give the in-place valve stem seal replacement a try if I was sure that that wa...
- Sun Apr 04, 2021 10:43 pm
- Forum: Technical Discussions
- Topic: Steering Column Bearings
- Replies: 3
- Views: 3535
Re: Steering Column Bearings
Hi Graham, I replaced mine on a 2.4L and that completely fixed a small wobble in the steering wheel. I noticed that although the bearings look the same on the drawing (they fit into the steering wheel support bracket), there is a tightening nut on the 2.4 whereas you have a spring (4140869). Could y...
- Thu Feb 11, 2021 12:27 pm
- Forum: Market
- Topic: fiat dino 2400 coupe rear end trim pieces
- Replies: 4
- Views: 2729
Re: fiat dino 2400 coupe rear end trim pieces
Well done, that's a great price for impossible-to-find items!